Determination of single-molecule loading rate during mechanotransduction in cell adhesion.

Cells connect with their environment through surface receptors and use physical tension in receptor-ligand bonds for various cellular processes. Single-molecule techniques have revealed bond strength by measuring "rupture force," but it has long been recognized that rupture force is dependent on loading rate-how quickly force is ramped up. Thus, the physiological loading rate needs to be measured to reveal the mechanical strength of individual bonds in their functional context. We have developed an overstretching tension sensor (OTS) to allow more accurate force measurement in physiological conditions with single-molecule detection sensitivity even in mechanically active regions. We used serially connected OTSs to show that the integrin loading rate ranged from 0.5 to 4 piconewtons per second and was about three times higher in leukocytes than in epithelial cells.

Optical Photothermal Infrared - Fluorescence In Situ Hybridization (OPTIR-FISH).

Understanding the metabolic activities of individual cells within complex communities is critical for unraveling their role in human disease. Here, we present a comprehensive protocol for simultaneous cell identification and metabolic analysis with the OPTIR-FISH platform by combining rRNA-tagged FISH probes and isotope-labeled substrates. Fluorescence imaging provides cell identification by the specific binding of rRNA-tagged FISH probes, while OPTIR imaging provides metabolic activities within single cells by isotope-induced red shift on OPTIR spectra. Using bacteria cultured with 13C-glucose as a test bed, the protocol outlines microbial culture with isotopic labeling, fluorescence in situ hybridization (FISH), sample preparation, optimization of the OPTIR-FISH imaging setup, and data acquisition. We also demonstrate how to perform image analysis and interpret spectral data at the single-cell level with high throughput. This protocol's standardized and detailed nature will greatly facilitate its adoption by researchers from diverse backgrounds and disciplines within the broad single-cell metabolism research community.

Designing Oligonucleotide-Based FISH Probe Sets with PaintSHOP.

Fluorescent in situ hybridization (FISH) enables the visualization of the position and abundance of nucleic acid molecules in fixed cell and tissue samples. Many FISH-based methods employ sets of synthetic, computationally designed DNA oligonucleotide (oligo) FISH probes, including massively multiplexed imaging spatial transcriptomics and spatial genomics technologies. Oligo probes can either be designed de novo or accessed from an existing database of pre-discovered probe sequences. This chapter describes the use of PaintSHOP, a user-friendly, web-based platform for the design of sets of oligo-based FISH probes. PaintSHOP hosts large collections of pre-discovered probes from many model organisms and also provides collections of functional sequences such as primers and readout domains and interactive tools to add these functional sequences to selected probes. Detailed examples are provided for three common experimental scenarios.

Multiplexed electrochemical nucleic acid sensor based on visible light-mediated metal-free thiol-yne click reaction for simultaneous detection of different nucleic acid targets.

Simultaneous detection of multiple tumor biomarkers with a simple and low-cost assay is crucial for early cancer detection and diagnosis. Herein, we presented a low-cost and simple assay for multiplexed detection of tumor biomarkers using a spatially separated electrodes strategy. The sensor is fabricated based on a metal-free thiol-yne click reaction, which is mediated by visible light, on commercially available indium tin oxide (ITO) electrodes. Four biomarkers, including p53 DNA, Brca2 DNA, K-ras DNA, and MicroRNA-204 RNA, were used as model analytes, and the corresponding oligonucleotide probes were modified on the desired electrode units sequentially with 530 nm irradiation light in the presence of photosensitizer Eosin Y. By this visible light-mediated coupling reaction, oligonucleotide probe densities of up to 9.2 ± 0.7 × 1010 molecules/cm2 were readily obtained on the ITO electrode surface. The proposed multiplexed E-NA sensor could detect four different nucleic acid targets concurrently without crosstalk among adjacent electrodes and was also successfully applied for detecting targets in a 20% fetal calf serum sample. The detection limits for p53 DNA, Brca2 DNA, K-ras DNA, and MicroRNA-204 RNA were 0.72 nM, 0.97 nM, 2.15 nM, and 1.73 nM, respectively. The developed approach not only has a great potential for developing cost-effective biosensors on affordable substrates for nucleic acid target detection, but also be easily extended to detect other targets by modifying the specific oligonucleotide probes anchored on the electrode.

Tigerfish designs oligonucleotide-based in situ hybridization probes targeting intervals of highly repetitive DNA at the scale of genomes.

Fluorescent in situ hybridization (FISH) is a powerful method for the targeted visualization of nucleic acids in their native contexts. Recent technological advances have leveraged computationally designed oligonucleotide (oligo) probes to interrogate > 100 distinct targets in the same sample, pushing the boundaries of FISH-based assays. However, even in the most highly multiplexed experiments, repetitive DNA regions are typically not included as targets, as the computational design of specific probes against such regions presents significant technical challenges. Consequently, many open questions remain about the organization and function of highly repetitive sequences. Here, we introduce Tigerfish, a software tool for the genome-scale design of oligo probes against repetitive DNA intervals. We showcase Tigerfish by designing a panel of 24 interval-specific repeat probes specific to each of the 24 human chromosomes and imaging this panel on metaphase spreads and in interphase nuclei. Tigerfish extends the powerful toolkit of oligo-based FISH to highly repetitive DNA.

Fluorescent and electrochemical detection of nuclease activity associated with Streptococcus pneumoniae using specific oligonucleotide probes.

Streptococcus pneumoniae (S. pneumoniae) represents a significant pathogenic threat, often responsible for community-acquired pneumonia with potentially life-threatening consequences if left untreated. This underscores the pressing clinical need for rapid and accurate detection of this harmful bacteria. In this study, we report the screening and discovery of a novel biomarker for S. pneumoniae detection. We used S. pneumoniae nucleases as biomarker and we have identified a specific oligonucleotide that works as substrate. This biomarker relies on a specific nuclease activity found on the bacterial membrane, forming the basis for the development of both fluorescence and electrochemical biosensors. We observed an exceptionally high sensitivity in the performance of the electrochemical biosensor, detecting as low as 102 CFU mL-1, whereas the fluorescence sensor demonstrated comparatively lower efficiency, with a detection limit of 106 CFU mL-1. Moreover, the specificity studies have demonstrated the biosensors' remarkable capacity to identify S. pneumoniae from other pathogenic bacteria. Significantly, both biosensors have demonstrated the ability to identify S. pneumoniae cultured from clinical samples, providing compelling evidence of the potential clinical utility of this innovative detection system.

Chemi-Northern: a versatile chemiluminescent northern blot method for analysis and quantitation of RNA molecules.

This report describes a chemiluminescence-based detection method for RNAs on northern blots, designated Chemi-Northern. This approach builds on the simplicity and versatility of northern blotting, while dispensing of the need for expensive and cumbersome radioactivity. RNAs are first separated by denaturing gel electrophoresis, transferred to a nylon membrane, and then hybridized to a biotinylated RNA or DNA antisense probe. Streptavidin conjugated with horseradish peroxidase and enhanced chemiluminescence substrate are then used to detect the probe bound to the target RNA. Our results demonstrate the versatility of this method in detecting natural and engineered RNAs expressed in cells, including messenger and noncoding RNAs. We show that Chemi-Northern detection is sensitive and fast, detecting attomole amounts of RNA in as little as 1 sec, with high signal intensity and low background. The dynamic response displays excellent linearity. Using Chemi-Northern, we measure the reproducible, statistically significant reduction of mRNA levels by human sequence-specific RNA-binding proteins, PUM1 and PUM2. Additionally, we measure the interaction of the poly(A) binding protein, PABPC1, with polyadenylated mRNA. Thus, the Chemi-Northern method provides a versatile, simple, and cost-effective method to enable researchers to analyze expression, processing, binding, and decay of RNAs.

Highly Multiplexed and Simultaneous Characterization of Protein and RNA in Single Cells by Flow or Mass Cytometry Platforms Using Proximity Ligation Assay for RNA.

In situ hybridization of oligonucleotide probes to intracellular RNA allows quantification of predefined gene transcripts within millions of single cells using cytometry platforms. Previous methods have been hindered by the number of RNA that can be analyzed simultaneously. Here we describe a method called proximity ligation assay for RNA (PLAYR) that permits highly multiplexed RNA analysis that can be combined with antibody staining. Potentially any number of RNA combined with antigen can be analyzed together, being limited only by the number of analytes that can be measured simultaneously.

FBPP: software to design PCR primers and probes for nucleic acid base detection of foodborne pathogens.

Foodborne pathogens can be found in various foods, and it is important to detect foodborne pathogens to provide a safe food supply and to prevent foodborne diseases. The nucleic acid base detection method is one of the most rapid and widely used methods in the detection of foodborne pathogens; it depends on hybridizing the target nucleic acid sequence to a synthetic oligonucleotide (probes or primers) that is complementary to the target sequence. Designing primers and probes for this method is a preliminary and critical step. However, new bioinformatics tools are needed to automate, specific and improve the design sets to be used in the nucleic acid‒base method. Thus, we developed foodborne pathogen primer probe design (FBPP), an open-source, user-friendly graphical interface Python-based application supported by the SQL database for foodborne pathogen virulence factors, for (i) designing primers/probes for detection purposes, (ii) PCR and gel electrophoresis photo simulation, and (iii) checking the specificity of primers/probes.

Identification of chromosomes by fluorescence in situ hybridization in Gossypium hirsutum via developing oligonucleotide probes.

Discrimination of chromosome is essential for chromosome manipulation or visual chromosome characterization. Oligonucleotide probes can be employed to simplify the procedures of chromosome identification in molecular cytogenetics due to its simplicity, fastness, cost-effectiveness, and high efficiency. So far, however, visual identification of cotton chromosomes remains unsolved. Here, we developed 16 oligonucleotide probes for rapid and accurate identification of chromosomes in Gossypium hirsutum: 9 probes, of which each is able to distinguish individually one pair of chromosomes, and seven probes, of which each distinguishes multiple pairs of chromosomes. Besides the identification of Chrs. A09 and D09, we first find Chr. D08, which carries both 45S and 5S rDNA sequences. Interestingly, we also find Chr. A07 has a small 45S rDNA size, suggesting that the size of this site on Chr. A07 may have reduced during evolution. By the combination of 45S and 5S rDNA sequences and oligonucleotide probes developed, 10 chromosomes (Chrs. 3-7, and 9-13) in A subgenome and 7 (Chrs. 1-2, 4-5, and 7-9) in D subgenome of cotton are able to be recognized. This study establishes cotton oligonucleotide fluorescence in situ hybridization technology for discrimination of chromosomes, which supports and guides for sequence assembling, particularly, for tandem repeat sequences in cotton.

Heteromultivalency enables enhanced detection of nucleic acid mutations.

Detecting genetic mutations such as single nucleotide polymorphisms (SNPs) is necessary to prescribe effective cancer therapies, perform genetic analyses and distinguish similar viral strains. Traditionally, SNP sensing uses short oligonucleotide probes that differentially bind the SNP and wild-type targets. However, DNA hybridization-based techniques require precise tuning of the probe's binding affinity to manage the inherent trade-off between specificity and sensitivity. As conventional hybridization offers limited control over binding affinity, here we generate heteromultivalent DNA-functionalized particles and demonstrate optimized hybridization specificity for targets containing one or two mutations. By investigating the role of oligo lengths, spacer lengths and binding orientation, we reveal that heteromultivalent hybridization enables fine-tuned specificity for a single SNP and dramatic enhancements in specificity for two non-proximal SNPs empowered by highly cooperative binding. Capitalizing on these abilities, we demonstrate straightforward discrimination between heterozygous cis and trans mutations and between different strains of the SARS-CoV-2 virus. Our findings indicate that heteromultivalent hybridization offers substantial improvements over conventional monovalent hybridization-based methods.

Selective miR-21 detection technology based on photocrosslinkable artificial nucleic acid-modified magnetic particles and hybridization chain reaction.

Recently, microRNA (miRNA) detection in blood has attracted attention as a new early detection technology for cancer. The extraction of target miRNA is a necessary preliminary step for detection; however, currently, most extraction methods extract all RNA from the blood, which limits the detection selectivity. Therefore, a method for the selective extraction and detection of target miRNA from blood is very important. In this study, we utilized photocrosslinkable artificial nucleic acids and the hybridization chain reaction (HCR) in an attempt to improve upon the current standard method RT-qPCR, which is hampered by problems with primer design and enzymatic amplification. By introducing photocrosslinkable artificial nucleic acids to oligonucleotide probes modified with magnetic particles with a sequence complementary to that of the target miRNA and irradiating them with light, covalent bonds were formed between the target miRNA and the oligonucleotide probes. These tight covalent bonds enabled the capture of miRNA in blood, and intensive washing ensured that only the target miRNA were extracted. After extraction, two types of DNA (H1 and H2) modified with fluorescent dyes were added and the fluorescence signals were amplified by the HCR in the presence of the target miRNA bound to the photocrosslinkable artificial nucleic acids, allowing for isothermal and enzyme-free miRNA detection. The novel method is suitable for selective miRNA detection in real blood samples. Because the reaction proceeds isothermally and no specialized equipment is used for washing, this detection technology is simple and selective and suitable for application to point-of-care technology using microfluidic devices.

Simple and Multiplexed Detection of Nucleic Acid Targets Based on Fluorescent Ring Patterns and Deep Learning Analysis.

Simple diagnostic tests for nucleic acid targets can provide great advantages for applications such as rapid pathogen detection. Here, we developed a membrane assay for multiplexed detection of nucleic acid targets based on the visualization of two-dimensional fluorescent ring patterns. A droplet of the assay solution is applied to a cellulose nitrate membrane, and upon radial chromatographic flow and evaporation of the solvent, fluorescent patterns appear under UV irradiation. The target nucleic acid is isothermally amplified and is immediately hybridized with fluorescent oligonucleotide probes in a one-pot reaction. We established the fluorescent ring assay integrated with isothermal amplification (iFluor-RFA = isothermal fluorescent ring-based radial flow assay), and feasibility was tested using nucleic acid targets of the receptor binding domain (RBD) and RNA-dependent RNA polymerase (RdRp) genes of SARS-CoV-2. We demonstrate that the iFluor-RFA method is capable of specific and sensitive detection in the subpicomole range, as well as multiplexed detection even in complex solutions. Furthermore, we applied deep learning analysis of the fluorescence images, showing that patterns could be classified as positive or negative and that quantitative amounts of the target could be predicted. The current technique, which is a membrane pattern-based nucleic acid assay combined with deep learning analysis, provides a novel approach in diagnostic platform development that can be versatilely applied for the rapid detection of infectious pathogens.

Chemoproteomic Approaches to Studying RNA Modification-Associated Proteins.

The function of cellular RNA is modulated by a host of post-transcriptional chemical modifications installed by dedicated RNA-modifying enzymes. RNA modifications are widespread in biology, occurring in all kingdoms of life and in all classes of RNA molecules. They regulate RNA structure, folding, and protein-RNA interactions, and have important roles in fundamental gene expression processes involving mRNA, tRNA, rRNA, and other types of RNA species. Our understanding of RNA modifications has advanced considerably; however, there are still many outstanding questions regarding the distribution of modifications across all RNA transcripts and their biological function. One of the major challenges in the study of RNA modifications is the lack of sequencing methods for the transcriptome-wide mapping of different RNA-modification structures. Furthermore, we lack general strategies to characterize RNA-modifying enzymes and RNA-modification reader proteins. Therefore, there is a need for new approaches to enable integrated studies of RNA-modification chemistry and biology.In this Account, we describe our development and application of chemoproteomic strategies for the study of RNA-modification-associated proteins. We present two orthogonal methods based on nucleoside and oligonucleotide chemical probes: 1) RNA-mediated activity-based protein profiling (RNABPP), a metabolic labeling strategy based on reactive modified nucleoside probes to profile RNA-modifying enzymes in cells and 2) photo-cross-linkable diazirine-containing synthetic oligonucleotide probes for identifying RNA-modification reader proteins.We use RNABPP with C5-modified cytidine and uridine nucleosides to capture diverse RNA-pyrimidine-modifying enzymes including methyltransferases, dihydrouridine synthases, and RNA dioxygenase enzymes. Metabolic labeling facilitates the mechanism-based cross-linking of RNA-modifying enzymes with their native RNA substrates in cells. Covalent RNA-protein complexes are then isolated by denaturing oligo(dT) pulldown, and cross-linked proteins are identified by quantitative proteomics. Once suitable modified nucleosides have been identified as mechanism-based proteomic probes, they can be further deployed in transcriptome-wide sequencing experiments to profile the substrates of RNA-modifying enzymes at nucleotide resolution. Using 5-fluorouridine-mediated RNA-protein cross-linking and sequencing, we analyzed the substrates of human dihydrouridine synthase DUS3L. 5-Ethynylcytidine-mediated cross-linking enabled the investigation of ALKBH1 substrates. We also characterized the functions of these RNA-modifying enzymes in human cells by using genetic knockouts and protein translation reporters.We profiled RNA readers for N6-methyladenosine (m6A) and N1-methyladenosine (m1A) using a comparative proteomic workflow based on diazirine-containing modified oligonucleotide probes. Our approach enables quantitative proteome-wide analysis of the preference of RNA-binding proteins for modified nucleotides across a range of affinities. Interestingly, we found that YTH-domain proteins YTHDF1/2 can bind to both m6A and m1A to mediate transcript destabilization. Furthermore, m6A also inhibits stress granule proteins from binding to RNA.Taken together, we demonstrate the application of chemical probing strategies, together with proteomic and transcriptomic workflows, to reveal new insights into the biological roles of RNA modifications and their associated proteins.

Precise Identification and Profiling of Surface Proteins of Ultra Rare Tumor Specific Extracellular Vesicle with Dynamic Quantitative Plasmonic Imaging.

Specific detection of tumor-derived EVs (tEVs) in plasma is complicated by nontumor EVs and non-EV particles. To accurately identify tEVs and profile their surface protein expression at single tEV resolution directly with clinical plasma is still an unmet need. Here, we present a Dynamic Immunoassay for Single tEV surface protein Profiling (DISEP), a kinetic assay based on surface plasmon resonance microscopy (SPRM) for specific single tEV profiling. DISEP adopts a pair of low-affinity oligonucleotide probes to respectively label EV surface proteins and functionalize an SPRM biosensor interface. tEVs labeled with the oligonucleotide probes possess distinctive binding kinetics from nonspecific particles in plasma, which permits accurate digital plasmonic counting of single EVs. We demonstrate DISEP for recognizing target EVs among 350-fold background plasma particles with high sensitivity (4677 EVs per µL). Clinical plasma samples were analyzed to discriminate between pancreatic cancer patients (n = 40) and healthy donors (n = 45). With a panel of biomarker signatures (EpCAM, HER2, and GPC1), DISEP only requires 10 µL primary sample from each donor to classify tumor patients with an area under the curve of 0.98. DISEP provides a highly specific EV detection and surface protein profiling strategy for early cancer diagnosis.

Sequence-Specific Fluorescence Turn-On Sensing of RNA by DNA Probes Incorporating the Tricyclic Cytidine Analogue DEAtC.

Sequence-specific fluorescent probes for RNA are widely used in microscopy applications such as fluorescence in situ hybridization and a growing number of newer approaches to live-cell RNA imaging. The sequence specificity of most of these approaches relies on differential hybridization of the probe to the correct target. Competing sequences with only one or two base mismatches are prone to causing off-target recognition. Here, we report the sequence-specific fluorescent detection of model RNA targets using a tricyclic cytidine analogue DEAtC that is included as a surrogate for natural cytidine in DNA probe strands and that reports directly on Watson-Crick base pairing. The DEAtC-containing DNA oligonucleotide probes exhibit an average 8-fold increase in fluorescence intensity when hybridized to matched RNA with DEAtC base paired with G and little fluorescence turn-on when DEAtC is base paired with A. Duplex structure determination by NMR, time-resolved fluorescence studies, and Stern-Volmer quenching experiments suggest that the combination of greater π stacking and narrower grooves in the A-form DNA-RNA heteroduplex provides additional shielding and favorable electronic interactions between bases, explaining why DEAtC's fluorescence turn-on response to RNA targets is typically 3-fold greater than for DNA targets.

Bioinformatic Prediction of Bulked Oligonucleotide Probes for FISH Using Chorus2.

Fluorescence in situ hybridization (FISH) provides great conveniences for detection and visualization of specific genomic segments. Oligonucleotide (Oligo)-based FISH further broadened the applications in plant cytogenetics researches. High-specific single-copy oligo probes are essential for successful oligo-FISH experiments. Here, we introduce the bioinformatic pipeline to design genome-scaled single-copy oligos and filter repeat-related probes with Chorus2 software. Robust probes are accessible for both well-assembled genome and species without a reference genome based on this pipeline.

Visualization of Oligonucleotide-Based Probes Along Pseudochromosomes Using RIdeogram, KaryoploteR, and Circlize (Circos).

Fluorescence in situ hybridization (FISH) using oligonucleotide-based probes is an innovative modification of classic FISH techniques, enabling karyotypic identifications. Here, we exemplarily describe the design and in silico visualization of oligonucleotide-based probes derived from the Cucumis sativus genome. Additionally, the probes are also plotted comparatively to the closely related Cucumis melo genome. The visualization process is realized in R using various libraries for linear or circular plots including RIdeogram, KaryoploteR, and Circlize.

Improved enzymatic labeling of fluorescent in situ hybridization probes applied to the visualization of retained introns in cells.

Fluorescence in situ hybridization (FISH) is a widely used tool for quantifying gene expression and determining the location of RNA molecules in cells. We present an improved method for FISH probe production that yields high-purity probes with a wide range of fluorophores using standard laboratory equipment at low cost. The method modifies an earlier protocol that uses terminal deoxynucleotidyl transferase to add fluorescently labeled nucleotides to synthetic deoxyoligonucleotides. In our protocol, amino-11-ddUTP is joined to an oligonucleotide pool prior to its conjugation to a fluorescent dye, thereby generating pools of probes ready for a variety of modifications. This order of reaction steps allows for high labeling efficiencies regardless of the GC content or terminal base of the oligonucleotides. The degree of labeling (DOL) for spectrally distinct fluorophores (Quasar, ATTO, and Alexa dyes) was mostly >90%, comparable with commercial probes. The ease and low cost of production allowed the generation of probe sets targeting a wide variety of RNA molecules. Using these probes, FISH assays in C2C12 cells showed the expected subcellular localization of mRNAs and pre-mRNAs for Polr2a (RNA polymerase II subunit 2a) and Gapdh, and of the long noncoding RNAs Malat1 and Neat1 Developing FISH probe sets for several transcripts containing retained introns, we found that retained introns in the Gabbr1 and Noc2l transcripts are present in subnuclear foci separate from their sites of synthesis and partially coincident with nuclear speckles. This labeling protocol should have many applications in RNA biology.

The fluorescence regulation of a tri-functional oligonucleotide probe HEX-OND in detecting Pb(II), cysteine, and K(I) based on two G-quadruplex forms.

A novel tri-functional probe HEX-OND was developed for detecting Pb(II), cysteine (Cys), and K(I) by fluorescence quenching, recovery, and amplification strategies respectively, based on Pb(II)-induced chair-type G-quadruplex (CGQ) and K(I)-induced parallel G-quadruplex (PGQ). The thermodynamic mechanism was illustrated as that HEX-OND transformed into CGQ by associating equimolar Pb(II) (K1 = 1.10 ± 0.25 × 106 L/mol), forcing (G)2 spontaneously approaching and static-quenching HEX (5'-hexachlorofluorescein phosphoramidite) in the photo-induced electron transfer (PET) way by the van der Waals force and hydrogen bond (K2 = 5.14 ± 1.65 × 107 L/mol); the additional Cys recovered fluorescence in the molecular ratio of 2:1 via Pb(II)-precipitation induced CGQ destruction (K3 = 3.03 ± 0.77 × 109 L/mol); the equimolar K(I) induced HEX-OND transforming into PGQ (K4 = 3.53 ± 0.30 × 104 L/mol) and specifically associating with the equimolar N-methyl mesoporphyrin IX (NMM) by hydrophobic force (K5 = 3.48 ± 1.08 × 105 L/mol), leading to the fluorescence enhancement. Moreover, the practicability results showed that the detection limits reached a nanomolar level for Pb(II) and Cys and micromolar for K(I), with mere disturbances for 6, 10, and 5 kinds of other substances, respectively; no significant deviations of the real sample detection results were found between the well-understood methods with ours in detecting Pb(II) and Cys, and K(I) could be recognized and quantified even in the presence of Na(I) with 5000 and 600 fold respectively. The results demonstrated the triple-function, sensitivity, selectivity, and tremendous application feasibility of the current probe in sensing Pb(II), Cys, and K(I).